Table of Contents
What is a survey controller?
Trimble Survey Controller field software provides a complete data-collection solution for GPS / GNSS and optical surveying. It gives full control over data collection and stakeout, with color maps displaying results in real time as you measure. Surveying data is organized in a single job file.
What is a site calibration in surveying?
A site calibration is a series of mathematical computations that transform WGS84 coordinates into local grid coordinates. Essentially, a GNSS site calibration establishes the relationship between WGS84 latitude, longitude, and ellipsoidal height, with the needed local northing, easting, and elevation.
What is Trimble Access?
Trimble® Access™ services provides cloud-based data hosting and visualization tools for collaboration and easy access to your data with the Trimble Connect cloud. It also features: A synchronization service that allows data to be shared instantly between the office and field crew – and between field crews.
How do I unlock TSC3?
Re: How to unlock my TSC3 controller screen connect your PC keyboard to tsc3 controller. then press ‘F1’ and press ‘ * ‘ . and it will be unlock.
What is a field controller?
A series of points whose relative positions and elevations are known. These positions are used in basic data in mapping and charting.
What is Trimble TSC3?
The Trimble® TSC3 controller with Trimble Access™ software is a handheld field computing solution that streamlines the flow of everyday surveying work and the number of devices you need in the field. Windows. Operating System. 10.7 cm / 4.2″
What is Trimble used for?
It is designed with Trimble 360 receiver technology that provides an advanced satellite tracking system. It includes the Trimble DL Android app that aids in collecting the GNSS raw data for post-processing.
How do I hard reset my TSC3?
Reset the Ranger 3 / TSC3 by holding the Power button down for a few seconds until the countdown appears, then release and tap the ‘Reset’ button. After you see the white screen that says ‘Bootloader’ at the top, you will then see the Red/Green/Blue/Gray vertical striped lines.
What is field control engineering?
Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. In most cases, control engineers utilize feedback when designing control systems.
How many points can be sectioned in a TSS survey?
Generally, points are re sectioned by observing three known points of equal or greater accuracy. Two point resections may be acceptable if the angle between the observed points is less than 135 degrees or greater than 225 degrees. All specifications for third order must be met.
How are data collected in a cross sectional survey?
Even though the data are collected at one point in time with the cross-sectional survey there are methods of comparing items or looking for change. For example, . the questions asked may be time-ordered, referring to events in the past, present, or the future.
How many control points does the National Geodetic Survey have?
In the U.S., the National Geodetic Survey (NGS) maintains a National Spatial Reference System (NSRS) that consists of approximately 300,000 horizontal and 600,000 vertical control stations (Doyle,1994). Coordinates associated with horizontal control points are referenced to NAD 83; elevations are relative to NAVD 88.
What is the total station System ( TSS ) system?
9-02 The TSS Method The TSS is a system that includes an electronic total station and electronic data collecting system. Conventional survey methods of traverse, network, resection, multiple ties and trigonometric leveling are used with the TSS method. Each WSDOT field survey crew is equipped with a TSS.