What is Ktec AC adapter used for?
Ktec makes a number of different 12 V AC to DC adapters that are basically external power supplies used with devices that run on batteries or have no other power source. Each of these Ktec 12 V power adapters or power supplies consists of a converter unit that is plugged into an AC wall socket.
Can you use a 12V adapter for a 6V device?
If the device has its own internal switching regulator, the voltage probably won’t be a problem, but since the 12V power supply has a lower maximum power (12V * 0.35A = 4.2W, and 6V * 1A = 6W), it may draw too much power and the power supply will be damaged.
Are all DC adapters the same?
– Yes, they are likely interchangeable even though voltage is not the same. This is because the voltage difference is within specs, and I am GUESSING you could go even higher or lower in voltage.
How do I match a DC adapter?
The general rule is to match the V and equal or beat the mAh, so if you are choosing an AC adapter to make sure you check the following, The adapter output V matches the rated input V of the device. The adapter output is greater or equal to the devices rated mAh or A.
What is ITE Power Supply?
ITE(Information technology Equipment) / ICT(Information and communications technology) Power Supplies and adapters. Such AC DC adapters and power supplies are intended for use in general electronics applications such as computers, telecom equipment, audio/video equipment, and countless others.
How do I know what size DC plug I need?
Connector size is often listed in the format OD (outer diameter) × ID (inner diameter) × L (length of barrel) and expressed in millimeters. Designations may vary between manufacturers. Coaxial plugs that have a male center pin will have another measurement, Center Pin Diameter (CPD).
How do you cut 12V to 6V?
It’s possible to step 12 volts down to 6 volts by incorporating a pair of 10,000-ohm resistors into the circuit. Cut two lengths of wire, and strip each wire of 1/2 inch of insulation at each end. Attach one end of the first wire to the positive terminal on the power supply.
How do I find the right AC adapter?
Check the following when selecting an AC adapter:
- Make sure the output of the adapter is equal to the input of the device.
- The adapter output is greater or equal to the devices rated mAh or A.
- Make sure the adapter plug has the correct polarity and smoothly fits into your device.
What is ITE USE ONLY mean?
Information technology Equipment
ITE(Information technology Equipment) / ICT(Information and communications technology) Power Supplies and adapters. Such AC DC adapters and power supplies are intended for use in general electronics applications such as computers, telecom equipment, audio/video equipment, and countless others.