Table of Contents
- 1 What is the first thing you need to do before raising or lowering a load?
- 2 How should a forklift operator approach a load?
- 3 What is the correct behavior when driving a loaded forklift up an incline?
- 4 When lowering a heavy load try to?
- 5 What should operators do before raising the forks or platform of their forklift truck?
- 6 What should I know about operating a forklift?
- 7 What is the load center of a forklift?
What is the first thing you need to do before raising or lowering a load?
What is the first thing you need to do before raising or lowering a load? Check that the overhead clearance is adequate before raising loads. Do not raise or lower the fork unless the lift truck is stopped and braked. Lift loads straight up or tilt back slightly.
When operating a loaded forklift on a ramp or incline the operator should?
Requirements and Recommended Practices
- When traveling with a load, the load should point up the incline, regardless of direction of travel.
- Going up the incline: Drive forward. Forks pointed upgrade. Use a spotter if load blocks the driver’s view.
- Going down the incline: Drive in reverse. Turn head and face downgrade.
How should a forklift operator approach a load?
Approaching the Load
- Always approach the load slowly and carefully.
- Stop 8-12 inches in front of the load.
- Make sure the truck is placed squarely in front of the load.
- Make sure the forks are at the correct height for lifting the load.
- Set the direction control to neutral.
When should a forklift operator tilt the load back on the mast?
The mast must be carefully tilted backward to stabilize the load. Ensure the load is secured before moving. Slowly move the truck to 20 to 30 cm (8 to 12 inches) away from the stack.
What is the correct behavior when driving a loaded forklift up an incline?
When going up an incline with a load, a forklift operator should: Keep the forks pointed upgrade. Move the lift forward slowly and carefully. Ask for assistance from a spotter; a spotter can help an operator keep an eye out for hazards that block their view.
What is the recommended load height when traveling with a load on a forklift?
6 to 10 inches
Carrying the load Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back. Use caution when carrying a load on an uneven surface; it creates a tip-over hazard.
When lowering a heavy load try to?
Keep the load close to the waist for as long as possible while lifting to reduce the amount of pressure on the back. Keep the heaviest side of the load next to the body. If closely approaching the load is not possible, try to slide it towards the body before trying to lift it.
When Travelling at what height should the load and fork arms be?
Carrying the load Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back. Use caution when carrying a load on an uneven surface; it creates a tip-over hazard.
What should operators do before raising the forks or platform of their forklift truck?
Before elevating personnel, mark or cordon off the area with safety cones or other devices to warn others of the work being done. Make sure the lift truck is on a flat, level surface, and has firm, level footing. Make sure the platform is attached securing to the forks or mast as directed by the manufacturer.
What’s the proper way to raise a forklift?
Do not raise or lower the forks unless the forklift is stopped and the brake is set. Prior to raising the load, ensure there is adequate overhead clearance. Vision is obstructed after the load is elevated. Use the inching pedal to creep the load to the stack.
What should I know about operating a forklift?
Be certain that the truck is placed squarely in front of the load and that the forks are at the correct height. Do not raise or lower the forks unless the forklift is stopped and the brake is set. Prior to raising the load, ensure there is adequate overhead clearance.
What should I do if my forklift overloads?
Fasten your seat belt. Make sure the load is within the forklift’s rated capacity. The nameplate on the forklift lists its maximum load weight. Never exceed it! Use the proper lift fixture for the type of load, such as a carpet spike or drum grappler. Make sure the load is stable and centered; stack or tie uneven or loose loads.
What is the load center of a forklift?
The load center is the distance from the face of the forks to the load’s center of gravity. Many forklifts are rated using a 24-inch load center, which means that the load’s center of gravity must be 24 inches or less from the face of the forks.