What is the legal minimum TYRE tread depth for an LGV vehicle?

What is the legal minimum TYRE tread depth for an LGV vehicle?

1mm
Must have a tread depth of at least 1mm across ¾ of the breadth of the tread and in a continuous band around the entire circumference. There should be no cuts, damage or signs of cord visible at the sidewalls.

What is the minimum tread depth for front tires on a truck?

4/32-inch
You absolutely must memorize that the front tires (steer tires) need at least 4/32-inch tread depth in every major groove. All other tires (drive tires, trailer tires, etc) must have at least 2/32-inch tread depth in every major groove.

What is the minimum depth tread required over three quarters of an LGV tyre?

It’s essential that this contact gives you the grip you need to control your vehicle at all times. For that reason, goods vehicles must have a tread depth of at least 1 mm across three-quarters of the breadth of the tread and in a continuous band around the entire circumference.

What is the legal minimum tread depth for vehicles over 3500kg?

HEAVY GOODS VEHICLES over 3500kgs The tyre must have a minimum pattern depth of 1.0mm throughout a continuous band measuring at least three quarters of the breadth of the tread and round the entire outer circumference of the tyre.

Is 2 mm tyre tread legal?

Minimum legal tread depth So, what is the minimum tread depth required for car tyres? While a new car tyre begins life with approximately 8mm of tread, the minimum legal tread depth is 1.6mm. However, most motoring organisations recommend changing your tyres before the tread gets to this level.

What is the legal tyre tread depth in UK?

1.6 millimeters
The legal minimum tread depth for car tyres in the uk is 1.6 millimeters, across the central ¾ which is 75% of the tread around the complete circumference of the tyre.

What is acceptable tire tread depth?

2/32”
The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth. The idea of the penny test is to check whether you’ve hit the 2/32” threshold. Here’s how it works: Place a penny between the tread ribs on your tire.

What is the minimum tire tread depth in Ohio?

one sixteenth of one inch
All tires shall have a minimum of one sixteenth of one inch depth of tread on the road surface. All tires shall be free of major bumps or bulges, breaks, thrown tread or any condition which would constitute an unsafe condition.

What is the legal minimum tread depth for tyres on a trailer or caravan?

1.6mm
Check the tread wear regularly – the legal minimum is 1.6mm across the central three quarters of the tread breadth around the entire circumference of the tyre.

What is the minimum legal limit of tread depth on a bus across 75% of the tyre?

1.6 mm tread depth. 1.6 mm across 75% of the width of the tyre. 1.6 mm around the entire circumference of the tyre.

How long do 3mm tyres last?

With all the possible variables taken into account, the minimum average period 3mm of tyre tread depth will last before it reaches the legal limit of 1.6mm is between would be 10,000-20,000 miles but it could be considerably more than that.

Is 2 mm TYRE tread legal?

How many LGV drivers know the tyre tread depth?

Only 38% of LGV drivers know the correct minimum legal tread depth for their truck’s tyres, highlighting a need for further education within the industry.

What’s the legal minimum depth of tread for car tyres?

Explanation: Car tyres must have sufficient depth of tread to give them a good grip on the road surface. The legal minimum for cars is 1.6 mm. This depth should be across the central three-quarters of the breadth of the tyre and around the entire circumference.

What’s the minimum tread depth for a HGV?

Minimum tread depth 1mm (vehicle over 3,500kg gross vehicle weight) over a continuous band covering at least any three-quarters of the breadth of the tread around the entire circumference. The base of any groove of the original tread pattern must be visible on the remaining one-quarter of the tread.

What is the depth of a tyre pass?

Pass (advise at discretion of assessor). Depth of tread is greater than 1mm throughout the circumference of a band covering at least three-quarters of the tread width & the base of any groove of the original tread pattern is visible on the remaining one-quarter of the tread