What is the twist rate of a Remington 788?

What is the twist rate of a Remington 788?

From some date in 1969 on forward Remington used a 1 in 9″ twist rate in the 788 243 Win.

Why is the Remington 788 so accurate?

It has a smaller ejection port than similar bolt-action rifles, and no bolt lug raceways. A rifle’s accuracy tends to increase slightly as the rigidity of the receiver increases, as this slightly reduces barrel deflection during firing. Thus the Remington 788 has the structural foundation to be a very accurate rifle.

What grain bullet is best for 1 in 8 twist?

1-in-8 Inches Twist Rate For a 16-inch general-use carbine, the 1-in-8 twist is about as versatile as it gets. This twist rate will comfortably stabilize bullets up to 80-grains, and the excellent 75- and 77-grain bullets also work great at a wider spectrum of velocities — which means barrel length isn’t critical.

What is the twist rate on a Remington 788 22 250?

24″ barrel – 1 in 14″ twist. Mine will shoot 1 M.O.A.

What is the best rifle barrel twist?

The 1:8 twist barrel is the most versatile of the bunch. This twist rate gives you the most flexibility, effectively stabilizing projectiles up to 80 grains but not over stabilizing lighter ammunition. The 1:9 barrel is best for stabilizing lighter and mid-weight bullets ranging between 45 and 77 grains.

What barrel twist is best?

The best barrel twist rate depends on what type of bullet you are shooting. A fast twist rate such as a 1:7” twist barrel will work better with long-range modern bullets where as a shorter twist such as 1:10” or 1:11” twist barrel will work better with shorter bullets.

Which twist rate is best?

How big is the barrel on a Remington 788?

Barrel lengths were 22 or 24 inches for standard rifles and 18.5 inches for carbines (.243, 7nm-08 and.308 calibers only). Left hand models were offered in 6mm Rem. and.308 Win. In my experience the 788 proved to be a very accurate rifle, a sentiment voiced by most 788 owners.

What is the twist rate of a Remington rifle?

Here are the usual twist rates for most of the popular rifle calibers. (For a more comprehensive list, see the expanded “Rifle Barrel Twist List” on the Tables, Charts and Listspage.) .17 HMR = 1 in 9″ .22 Long Rifle = 1 in 16″ .222 Remington = 1 in 14″ .223 Remington = 1 in 12″ (varmint rifle)

Are there different twist rates for rifle barrels?

Not all rifle barrels of the same caliber have the same twist rate. A fellow ordering a custom rifle may have his own ideas about twist, as may the builder. For example, some .270 Win. barrels are rifled with a 1 in 12 inches twist, some .30-06 barrels are also rifled 1 turn in 12 inches and some .300 Magnum barrels are rifled 1 turn in 14 inches.

What’s the standard twist rate for a.223 rifle?

Most manufacturers of AR-15 type civilian rifles followed suit. Unfortunately, 1:7″ is too fast for frangible varmint bullets, so now we have two “standard” twist rates for .223 rifles: 1:12″ for varmint rifles and 1:7″ for military type rifles. The latter are often, but not always, stamped “5.56mm.”