What is workplace label?

What is workplace label?

Workplace labels are created by the users of hazardous products being used in an area other than a laboratory. These labels are applied to the container of a hazardous product that was: created in the workplace, received without a supplier label or. transferred into a container that had no labelling.

What is a supply label?

The supplier label is the worker’s first warning about the hazards of a product and how to use it safely. A supplier must put the following information on the label of a hazardous product (see section 3, of the Hazardous Products Regulations ).

What are the two types of labels used in the Whmis system?

There are two main types of WHMIS labels: supplier labels, and workplace labels. Suppliers of hazardous products are required to apply a label that meets the requirements of the Hazardous Products Regulations. If the hazardous product is always used in the container with the supplier label, no other label is required.

What is required on a workplace container label?

The HCS requires chemical manufacturers, importers, or distributors to ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged or marked with the following information: product identifier; signal word; hazard statement(s); precautionary 1 Page 2 2 statement(s); and pictogram(s); and …

Can a workplace label be written by hand?

A workplace label may also be any size, format or colour. It can be typed or hand-written, as long as it has the 3 pieces of information.

What is a label and when is it used?

Labels may be used for any combination of identification, information, warning, instructions for use, environmental advice or advertising. They may be stickers, permanent or temporary labels or printed packaging.

Who is responsible for providing workplace labels?

employer
In general, your employer is responsible for providing workplace labels. Your employer must also make sure that all labels at your workplace are readable, and that they are replaced if damaged. Workplace labels are not needed in two specific cases.

How many labeling labels are required on a supplier label?

Most supplier labels show six types of information. The written information must be shown in both English and French. Supplier labels may be bilingual (as one label) or available as two labels (one in English, and one in French). The pictogram(s), signal word, and hazard statement(s) must be grouped together.

How many pieces of information should be on a workplace label?

3 pieces
A workplace label may also be any size, format or colour. It can be typed or hand-written, as long as it has the 3 pieces of information.

How many elements are included in the supplier labels?

Who is responsible for workplace labels?

How are laboratory labels different from workplace labels?

Laboratory labels are a subcategory of workplace labels. Most products used in a laboratory will have a supplier label and need no additional labelling. Lab labels are to be created for the same reasons as workplace labels and require the same information as workplace labels:

What do you need to know about supplier labels?

There are slightly different requirements for what must be on the label depending on who is required to put the label on the product. If a supplier label is not attached to a controlled product you are not to use the material until the supplier gives you an MSDS and a supplier label.

What happens if supplier label is not attached to controlled product?

If a supplier label is not attached to a controlled product you are not to use the material until the supplier gives you an MSDS and a supplier label. have the WHMIS hatched border.

What does a product label tell you about a product?

The labels also tell what precautions to take when using the product. In addition, labels also inform the person that there is a Material Safety Data Sheet (MSDS) available which contains more detailed information on the product.