Table of Contents
- 1 What kind of hydraulic fluid goes in a John Deere tractor?
- 2 Where does the hydraulic fluid go in a John Deere tractor?
- 3 What weight is John Deere high guard hydraulic oil?
- 4 What viscosity is John Deere high guard hydraulic fluid?
- 5 What kind of engine does a John Deere 2130 have?
- 6 Which is the best hydraulic fluid for a John Deere tractor?
What kind of hydraulic fluid goes in a John Deere tractor?
Hy-Gard
Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines. Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.
Where does the hydraulic fluid go in a John Deere tractor?
Get an Accurate Reading
- Remove the cap from the reservoir, which is usually located behind the driver’s seat on John Deere tractors.
- Pull out the dipstick and read the level.
- If you do need to add fluid, use a clean funnel to pour the oil into the reservoir slowly.
What weight is John Deere high guard hydraulic oil?
Low Viscosity Hy-Gard Hydraulic and Transmission Oil, 32 oz. An exclusive formulation, specifically designed to protect John Deere transmissions, final drives and hydraulic systems.
What is equivalent to Hy Gard oil?
Any brand 10w-30 synthetic oil would be good for the engine.
What weight oil is Hy-Gard?
I agree with Tim, HyGard is 15W-20W, Low Vis hy gard is 10W.
What viscosity is John Deere high guard hydraulic fluid?
Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades. Hy-Gard may be used in many applications specifying either of these grades.
What kind of engine does a John Deere 2130 have?
John Deere 2130 The John Deere 2130 is a 2WD or 4WD utility tractor manufactured by the John Deere in Mannheim, Baden-Württemberg, Germany from 1973 to 1977. The John Deere 2130 is equipped with a 3.9 L four-cylinder diesel engine and one of two transmissions with 8 forward and 4 reverse or 16 forward and 8 reverse gears.
Which is the best hydraulic fluid for a John Deere tractor?
The best hydraulic fluids for John Deere tractors are the ones which have been specifically designed for use in those machines. Whenever you use Hy-Gard or low viscosity Hy-Gard fluids, you can be certain that you’re getting the optimal performance from your machine, and that any excessive wear and tear will be prevented.
What kind of oil do you put in John Deere tractor?
When you’re adding additional fluid, make sure that you use John Deere HY-GARD or low viscosity oil Re-install the side panel, close the cover over the engine, and shut the rear service door.
When to check hydraulic fluid in a tractor?
You’ll also be able to better protect against any kind of damage to the hydro-static pumps, the hydraulic pump motors, the control valve, and the charge pump. When you do get around to checking the fluid level, make sure to do it at a time when the hydraulic oil is cold, and the boom is down.