What kind of oil does a Mercury outboard take?

What kind of oil does a Mercury outboard take?

Mercury 25W-40 Synthetic Blend Outboard Oil meets the stringent marine operational requirements of all of Mercury’s new 4 and 6 cylinder models.

What oil goes in a 4 stroke outboard?

Valvoline 4 Stroke Outboard 10W-40 Oil is a premium semi synthetic engine oil designed to meet the requirements of NMMA FC-W specification. Valvoline 4 Stroke Outboard 10W-40 Oil is formulated for both air and water-cooled 4 stroke outboard engines.

Do outboard motors need special oil?

Marine engine manufacturers offer a choice of mineral-based and synthetic-blend or full synthetic oils. There have been a few engines, such as the first-generation Mercury Verado outboards, that required a specific synthetic-blend oil. In most cases, however, mineral-based oil is acceptable.

Can you use automotive oil in an outboard?

Automotive engine oils have a pretty easy job compared to marine engine oils. They are blended for mileage, emissions and efficiency and are not suitable for use in marine engines.

Is Mercury 4-stroke oil Synthetic?

Synthetic Blend 4-Stroke (25W-40) Outboard Oil Mercury 25W-40 Synthetic Blend Outboard Oil meets the stringent marine operational requirements of all of Mercury’s new 4 and 6 cylinder models. First in class for all FC-W durability test properties with industry leading internal Marine engine corrosion protection.

What kind of oil goes in a boat motor?

If you operate your boat in consistent temperatures, choose a single-weight oil (e.g. SAE 30). If you operate your boat in a wider temperature range, select multi-viscosity oils (e.g. SAE 10W-30). They behave like thin oils in cold weather, making it easier to crank the engine.

Is Quicksilver a Mercury brand?

Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement parts and accessories. The two brands share the same DNA and same brand promise. The main differences between the two brands is where they are sold and the larger breadth of products available under the Quicksilver brand.

Is Mercury 10W30 synthetic?

MERCURY MARINE 10W30 Synthetic Blend 4-Stroke Outboard Oil Four stroke synthetic blend oil 8M0142135 is recommended for use in all four stroke outboards to 150 hp, 3.4L V-6 outboards and 4.6L V-8 outboards. It is SAE 10W30 weight oil. Provides outstanding wear and corrosion protection to help extend engine life.

What kind of oil should I use for my Mercury outboard?

For a Mercury two-stroke model, 2- to 20-horsepower outboard motor manufactured before 1980, use a blend of unleaded gasoline with a posted octane minimum of 91 and Mercury or Quicksilver Premium Plus 2-Cycle TC-W3 Outboard Oil at a ration of 50 parts fuel to one part oil.

What kind of oil do you use in a Mercury verduro?

For Mercury Verduro models that are between 275 and 300 horsepower, use premium unleaded gasoline with a posted octane minimum of 95 along with Mercury or Quicksilver OptiMax/DFI 2-Stroke Outboard Oil. For Mercury 350 horsepower Verduro models, use premium unleaded gasoline with a minimum of 98 octane instead of 95.

What do you need to know about Mercury Precision oil?

Things to know about this oil: For use in all 4-stroke marine engines. This oil is engineering approved for all marine 4-stroke applications including outboard, MerCruiser, high performance, sterndrive/inboard. Exceeds all marine industry 4-stroke oil requirements including FC-W and FC-W compatibility.

What kind of oil does a Mariner engine use?

Provides warranty protection for Mercury, Mariner, Force and Sport Jet and M2 Jet Drive 2-cycle engines. A synthetic blend 2-Cycle engine oil specifically formulated and developed to meet the needs of OptiMax and Direct Fuel Injected (DFI) 2-cycle outboard engines.