Table of Contents
What size is the wheel hub nut?
What size is a wheel hub nut? Front spindle nuts are the same size for wire wheel or disc wheel hubs, they should be 1 1/8″. The rear wheel hub nuts are 1 5/16″.
What size are bike front wheel nuts?
If it’s 5/16″ at 26 threads per inch then an M8-1.00 nut may fit since 25.4 tpi is very close to 26 tpi and 7.9mm diameter is very close to 8mm….8 Answers.
| Nominal Thread Size | Example of Bicycle Uses |
|---|---|
| 3/8 inch x 24 tpi | Some solid axle bike, including coaster brake |
| 3/8 inch x 26 tpi | Solid rear axle |
What size is an M10 nut?
10mm
M10 Hexagon Nuts (DIN 934) – Stainless Steel (A2) Technical Specification
| Finish | Natural |
|---|---|
| Nut Width A/F (J) | 17mm |
| Nut Width A/P (P) | 19.55mm |
| Thread Pitch | 1.5mm |
| Thread Size | M10 (10mm) |
What size is the axle nut on a 2008 Pontiac g6?
The nut size is 36mm.
What size is the axle nut on a 2006 g6?
This 36mm axle nut socket is extra deep to fit various axle lengths and can be used to remove or install axle nuts on front wheel drive vehicles.
How do I know my socket size?
How to Measure Socket Drive Size
- In the diagram above, the three key dimensions of a socket are labeled as Drive Hole, L, and S.
- L indicates the overall socket length.
- S indicates the target size of the nut, which determines which socket you’ll need.
- The size of the drive hole is determined by usage and torque demand.
What is the most common socket size?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).