Menu Close

What transmission is in a 1995 Chevy 1500?

What transmission is in a 1995 Chevy 1500?

1995 Chevy Silverado 1500 4WD Transmission, Rebuilt 4L60E Transmission.

Is there 2 different 4L60E transmissions?

The two transmissions cannot be differentiated from the outside. The 4L65E shares the same exterior parts but have stronger internals such as 5 pinion planets compared to 4 in the 4L60E. 4L60E uses a 6.5″ depth bell with 6 bolts for non gen 3 LS applications and a 7″ depth bell with 7 bolts for LS applications.

What transmission does a 1996 Chevy 1500 have?

1996 Chevy Silverado 1500 2WD Transmission, Rebuilt 4L60E Transmission.

Can I run a 4L60E without a computer?

Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. Never mind TCC lockup; without a computer, the trans won’t shift at all.

What kind of truck has a 4L60E transmission?

It can cause quite the headache. When the 4L60E went into production, it was being put behind the small-block Chevy and many smaller V6’s, predominantly in pickup trucks, Camaro, Corvette, Impala, Caprice, and so on.

Can a 94 4L60E be installed in a 95?

It appears as though it’s possible to install a ’94 4L60E in a ’95 vehicle as long as the PCM is reprogrammed to delete the PWM function. A ’95 can be installed in a ’94 as long as you add a wire into the trans harness that connects the PCM PWM pin to the transmissions PWM pin.

When did the SBC come out on the 4L60E?

By the time it started getting phased out of most pickup trucks in 2008, the 4L60E there was no SBC or any other motor from the early nineties in regular production. It was going behind the LS based motors or the longitudinal six cylinder found in the Trailblazer.

Is the Pan bolt pattern on a 4L60E the same?

The transmission pan bolt pattern is the same, regardless of the year that the 4L60E was made. They have the same gearing, regardless of what year or model that they are from, so you don’t need to worry about that. 4L60E transmission bellhousings are not the same