What type of freon does BMW use?
R134a
BMW refrigerant filling quantities R134a an 1234yf.
| Model | Year of manufacture | Freon |
|---|---|---|
| BMW 2-Series (F22) | 2013.10 – | R134a |
| BMW 2er-Serie Cabrio (F23) | 2013.10 – | R134a |
| BMW 3-Series (E30) | 1992 – 1993 | R134a |
| BMW 3-Series (E36) – Denso compressor (1*) | 1993 – 2000 | R134a |
How do you recharge the AC on a 2004 BMW 530i?
Procedure
- Start the engine and let it idle.
- Ensure your vehicle is in Park.
- Start the engine while keeping the vehicle in the park.
- Pull the hood release under the dashboard.
- Locate the low-pressure air conditioner charging port.
- Connect the a/c recharge kit to the low-pressure line.
How do I know what kind of freon my car AC needs?
There’s a sticker under the hood (Fig. 1), somewhere right up front, that tells you which refrigerant was used in the factory fill, and it also tells you how much. That sticker is part of SAE Standard J639, which provides safety and design standards for automotive air conditioning refrigerant systems.
How do I check the Freon in my BMW?
Remove the cap (anti-clockwise) and connect you’re A/C recharge kit to the low-pressure line. This will give you a reading on your refrigerant pressure. Now check your reading and check the tag on your air conditioning recharge kit to confirm that your refrigerant is low.
How much does it cost to recharge AC in BMW?
How Much Does BMW Air Conditioning Recharge Cost? The total cost of getting your refrigerant refill or A/C recharge will not be more than $250, even if you go to a dealership. However, it is something so common and easy, that you can do it at home in under 10 minutes and $80 with an average recharge kit.
What happens if I use the wrong PAG oil?
Using the wrong oil may allow current to short circuit back through the A/C compressor, creating a shock hazard. Mineral oil should only be used in older R-12 A/C compressors because R-12 will not mix with R-134 refrigerant. This can lead to poor lubrication and premature compressor failure.