Table of Contents
What type of oil does a 95 Jeep Wrangler take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (Below 16) |
|---|---|
| Capacity: | 6 quarts. (with filter)After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
What oil should I use in my Jeep Wrangler?
Mopar recommends using six quarts of 5W-20 oil. Depending on your driving conditions (extreme heat/cold) you can also use 5W-30.
What oil does a Jeep YJ use?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (Below 16) |
|---|---|
| Capacity: | 4 quarts. (with filter)After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
What kind of oil does a 1994 Jeep Wrangler take?
How much oil does a 2.4 Jeep Wrangler take?
Jeep Wrangler TJ Fluid Capacities
| Component | Quantity | Fluid Type |
|---|---|---|
| 2.4L Engine Oil | 4 Quarts / 3.8 Liters | 10w-30 or 5w-30 |
| Brake Fluid | Fill to Full Mark | DOT 3 |
| Clutch Fluid | ||
| Power Steering Reservoir | ATF 4 |
Can you use 5W-30 instead of 5W-20?
Can You Use 5w30 Instead Of 5w20. It is not recommended. Although they both have the same winter rating of 5, the thickness (viscosity) of 5w30 is a bit higher than 5w20. That means your engine’s at stake for using the high viscosity oil.
What kind of oil does a 1993 Jeep Wrangler take?
What oil does a 1992 Jeep Wrangler use?
How much oil does a YJ 2.5 l take?
Jeep Wrangler YJ Fluid Capacities
| Component | Quantity | Fluid Type |
|---|---|---|
| 2.5L Engine Oil | 4 Quarts / 3.8 Liters | 10w-30 or 5w-30 |
| 4.0L Coolant | 10.5 Quarts / 9.9 Liters | 50/50 Mixture of Antifreeze and water |
| 4.2L Coolant | ||
| 2.5L Coolant | 9.0 Quarts / 8.5 Liters |