What would cause a Dodge Ram not to start?

What would cause a Dodge Ram not to start?

While there are a variety of reasons your Dodge Ram 1500 won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.

What does the red light on a Dodge Ram mean?

It is considered a “security malfunction” warning. To reset, either charge or change the Ram’s existing battery. Disconnect charged battery cables for at least 15 minutes and up to an hour, before re-connecting them. The red light on the dash flashes when it is time to charge the battery on a 2002 dodge ram 1500.

Where is the starter relay on a 2007 Dodge Ram?

The starter relay on the 2007 dodge ram 1500 is located on the drivers side of the engine next to the battery by the firewall.

Where is starter on Dodge truck?

The Dodge Ram 1500 starter solenoid can be found in the main fuse panel that is located under the hood. This can be found directly behind the battery and has a plastic cover over it, when You remove the cover there is a label on the bottom that will let You know which solenoid is for the starter.

How do you reset the anti theft system on a Dodge Ram?

To reset the alarm on the Dodge Ram 1500 you need to lock all the doors, then unlock the driver side and put the key into the on position. Now turn it off and then back on twice and it will reset.

How do you reset the security system on a 2003 Dodge Ram?

To reset the 2003 dodge ram protection system, insert the ignition key and turn it to the on position and then attempt to start the engine (crank over), the engine does not start. With the key still in the run spot, wait 10 minutes, and the safety light will blink and then go out.

Where is the starter relay on a 2008 Dodge Ram 3500?

Registered. The starter relay is located inside the power distribution center a black box located next to the driverside battery.

Where is the starter relay located on a 2008 Dodge Ram?

This is basically an under hood fuse box towards the windshield on the passenger side. It appears to be mounted on the firewall.

How do I reset my Dodge RAM key fob?

How do you reset your key fob? Sit in your car with your remote and key fob, insert your key into the ignition, and turn the key to the “run” position. Press and hold the “unlock” button on your remote for four seconds, and press the “panic” button while still holding the other button.

How do you start a Dodge RAM without a key fob?

If you sit in the truck and look at the dash, you will see that there is a green ring that lights up around the start icon. If you simply put your foot on the brake and keep it there, the truck will start without the key fob being present.