Table of Contents
- 1 Why does my Dodge Ram jerk when I accelerate?
- 2 How much horsepower does a 1997 Dodge Ram 5.2 have?
- 3 What’s wrong with my car it jerks when I accelerate?
- 4 How do I check my Dodge Ram vacuum leak?
- 5 What is the Dodge 5.2 liter?
- 6 Why does my Dodge Ram keep backfiring?
- 7 What to do if your Dodge Ram has a leak?
Why does my Dodge Ram jerk when I accelerate?
Dirty fuel injectors are among the most common reasons for why an accelerator becomes jerky. The dirty injector leads to your car losing power when you attempt to accelerate while at a stop and when you try to drive at a consistent speed. This is the result of an engine misfire.
Why is my RAM misfiring?
Bad head gaskets, worn piston rings, bad valves and worn cylinder walls are all culprits. Damaged or broken rocker arms, broken valve springs, and worn camshaft lobes or lifters are also reasons for mechanical misfiring. Most of these failures will be accompanied by some form of internal engine noise.
How much horsepower does a 1997 Dodge Ram 5.2 have?
220 hp @ 4400 rpm
Used 1997 Dodge Ram Pickup 1500 ST Specs & Features
| Engine | |
|---|---|
| Base engine size | 5.2 l |
| Base engine type | Gas |
| Cylinders | V8 |
| Horsepower | 220 hp @ 4400 rpm |
Is a 5.2 Dodge engine good?
5.2 Magnum Reliability The 5.2 Magnum used in Dodge trucks and Jeeps is a pretty solid engine. It doesn’t suffer cylinder head cracks to the same extent that the 5.9 Magnum does.
What’s wrong with my car it jerks when I accelerate?
An acceleration problem is usually the result of insufficient fuel, air, or spark during the combustion process. A clogged catalytic converter is another reason why a car jerks while accelerating, as a blockage can disrupt the exhaust system’s airflow.
What does the code P0308 mean?
misfires
P0308 indicates that cylinder number 8 is experiencing misfires. A misfire occurs when an insufficient amount of fuel is burning in a cylinder. A misfire from one or more cylinders can be caused by many reasons from a faulty ignition system, fuel system, or internal engine failure.
How do I check my Dodge Ram vacuum leak?
Dodge Ram 1994-2008: How to Check for Vacuum Leaks
- Step 1 – Use a scan tool. Start with the easiest method.
- Step 2 – Connect a vacuum boost gauge. This tool helps you track down an issue with your vacuum line when the engine is running and under different conditions.
- Step 3 – Compile the data.
What engine is in a 1997 Dodge Ram 1500?
3.9 L V6
5.2 L V85.9 L V8
1997 Dodge Ram Pickup 1500/Engine
What is the Dodge 5.2 liter?
Dodge’s 5.2-liter engine features a V-type eight-cylinder construction with a 318-cubic inch displacement. The 5.2-liter 318 CID is a lightweight, single cam engine with hydraulic roller tappets. Its cylinder blocks and cylinder heads are made of cast-iron, and its camshaft is made of nodular cast-iron.
What is a Dodge 5.2 L?
Why does my Dodge Ram keep backfiring?
If the vehicle is still running rough and back firing, move on to Step 3. When the vehicle is backfiring, it could be that one of the cylinders is misfiring. T his is often caused by a bad spark plug. But, this issue could also be related to a faulty fuel filter or fuel injector.
Can a Dodge Ram be upgraded to 5.2?
There are dozens of possibilities for improving the performance of a stock 5.2 engine. The biggest limitations are time and money. This article will show you some of the most common engine modifications for the 5.2. This article applies to the Dodge Ram (1994-2001).
What to do if your Dodge Ram has a leak?
Inspect the vacuum line for leaks and cracks. There is also a check valve in that line. (Note direction of check valve before removing it for testing) Apply 8 inches of vacuum, with hand-held vacuum pump, to engine side of check valve.
Is it hard to troubleshoot a Dodge pick up?
Although it sucks that your Dodge pick up (or van, SUV) is misfiring, the cool thing is that troubleshooting the misfire is not that hard to do. Let’s find out more.