Menu Close

Why is my microwave showing 8888?

Admin

Why is my microwave showing 8888?

If a power failure should occur, a microwave, depending on the model, may display a “PF”, “888” or “8888” code. It is possible to see this display upon initial installation or after power was restored due to a power failure.

How do you reset a Sharp microwave?

Reset the clock after unplugging the microwave. Hit “Timer/Clock,” the colon between the hours and minutes will start to flash. Enter the time using the number buttons, 1:30 PM becomes “0130.” Sharp ovens use a 12-hour clock; any hour higher than 12 will be rejected.

Why is my microwave blinking?

A microwave flashing from the inside could be the sign of a dirty or faulty metal wave guide cover inside your appliance. Do not attempt to remove, clean or repair the wave guide cover on your own. While the problem is likely not a severe safety hazard, do not attempt to remove the wave guide cover yourself.

How do you fix a microwave power failure?

8 steps to fix a microwave after a power outage

  1. Step 1: Safety first.
  2. Step 2: Check the plug & outlet.
  3. Step 3: Check GFCI resets.
  4. Step 4: Check the breaker.
  5. Step 5: Try a hard reset.
  6. Step 6: Check the door latch.
  7. Step 7: Check the fuses.
  8. Step 8: Consider seeking professional assistance.

How do you reset the power level on a microwave?

Microwave – How to Change the Power Level

  1. Press Time Cook, Micro Cook or Cook Time.
  2. Enter the cooking time in minutes and seconds.
  3. Press Power Level.
  4. Select a desired power level between 1-10 (Default is 10 which is the highest power level).
  5. Press the Start/Pause button.

How do I fix my microwave light?

Behind the Microwave

  1. Turn your microwave around.
  2. Grab the screwdriver and remove mounting screws around the edge of the microwave back panel.
  3. Carefully pull the cabinet cover away from the top and sides.
  4. Find the light bulb cover and remove the mounting screws.
  5. Remove the old bulb and replace it with the new light bulb.

What to do if your microwave display is flashing 88?

…Use a metal ( not the shiny chrome type ) screw driver with a insulated handle to short across ( touch both at the same time ) the terminals of the high voltage capacitor to discharge it. FMV156DSB Frigidaire 6-10 years I replaced the primary interlock switch that was bad. Put it back together and now the display is flashing 88:88. Please help

What should I do if my sharp microwave is not working?

• Control Lock is on. • Call for service to unlock. Display flashes. • Power failure. • Touch Clear pad and reset the clock. If the Microwave Drawer was in use, you must reset the cooking function. • During microwaving, steam may come from the right side of the vent.

How can I Set my microwave oven to 88?

1. Plug in the microwave oven. Close the door. The microwave oven 88:88. 2. Touch the Clear/Off pad. : will appear. 3. Set clock. or P.M.). 1. Touch Timer/Clock pad. 2. Enter time 1,2,3,0 and touch Timer/Clock pad again. This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display.

What does it mean when your sharp microwave says error code?

If your Sharp microwave is displaying an error code, this means you have a clue to resolve the problem. Find the code in the tables below to learn what you can do. In case of a significant issue, the manufacturer recommends that you call for service or call an electrician.