How do I reset my 2007 Pontiac G6?

How do I reset my 2007 Pontiac G6?

How to Reset Oil Life: Pontiac G6 2006-2010

1. 1-Turn the ignition to RUN (second position)
2. 2-Press the INFO button to scroll until the Oil Life displays.
3. 3-Press the MENU and ENTER (arrow) buttons at the same time to display OIL LIFE RESET.
4. 4-Press and hold the ENTER (arrow) button until the cluster shows AKNOWLEDGED.

Where is the reset button on a 2008 Pontiac G6?

the ‘set/reset’ button is the bottom left button that is an arrow pointing left.

Why is my Pontiac G6 not starting?

While there are a variety of reasons your Pontiac G6 won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.

How do you reset the check engine light on a Pontiac G6?

A few different ways to reset your check engine light are:

1. Let it go off by itself.
2. Turn your ignition on and off several times in a row.
3. Disconnect your battery and reconnect it.
4. Buy an OBD II scanner (they’re relatively inexpensive) and follow the instructions (it’s pretty easy)

How do you reset the radio on a Pontiac G6?

How to Reset a GM Radio

1. Turn on your car.
2. Press and hold down both the second and third preset buttons.
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display.

How do you reset the check engine light on a 2006 Pontiac G6?

How do you reset the TPMS on a Pontiac G6?

With DIC Button

1. Press the INFO repeatedly until TIRE LEARN?
2. Press and hold the ⏎ button until the horn sounds twice.
3. Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire’s air pressure until a horn chirp sounds.
4. A horn chirp will confirm that the sensor has been reset.

How do you turn off the check engine light on a Pontiac G6?