Menu Close

How do you turn off the airbag light on a Nissan Maxima?

Admin

How do you turn off the airbag light on a Nissan Maxima?

How to Reset The Airbag Status Light On A Nissan

  1. Insert the key into the ignition and turn the key to ON.
  2. Notice that the light will stay on and then start blinking.
  3. Wait 5 seconds.
  4. Wait 5 seconds and repeat step 1.
  5. When you are complete, you should have inserted the key and removed it for a total of 6 times.

How do you reset the airbag on a Nissan?

  1. Turn ignition switch from OFF to ON.
  2. Air Bag warning lamp is on for 7 seconds and turns off, the turn ignition switch OFF within 1 second after the lamp turn off.
  3. After ignition switch is turned OFF, wait for more than 3 seconds.
  4. Repeat steps 1 to 3 twice.
  5. Turn Ignition switch ON.
  6. The SRS lamp has been reset it.

How do I reset my airbag light?

How to Reset an Airbag Light

  1. Put the key into the ignition and turn the switch to the “on” position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

Where is the airbag control module located in a car?

To remove your airbag control module, follow these steps: First find the srs computer module. In most cars it is under the center console that is between the two front seats, or center of the dash on the floor. In most GM cars it is under the driver or passenger seat.

How to reset the air bag warning light?

1. Turn ignition switch “ON”. 2. After “AIR BAG” warning lamp lights for 7 seconds, [i.e. when it stops running solid and starts flashing] turn ignition switch “OFF” within 1 second. [DO NOT SWITCH IT TO LOCK, SWITCH IT TO ACC] 3. Wait more than 3 seconds. 4. Repeat steps 1 to 3 two times. (Perform 3 times in total.)

How to remove the SRS airbag control module?

To remove your airbag control module, follow these steps: 1 First find the srs computer module. In most cars it is under the center console that is between the two front seats, or center of the dash on the floor. 2 Disconnect the positive battery cable and wait 3 min. 3 You are now safe to unplug the airbag control module harness wiring plugs.

Why does my airbag light never come on?

If your light never comes on at all, your METER fuse might be blown, or you might have a wiring fault in an airbag circuit.Go directly to Infiniti and have a professional fix this.