Table of Contents
What is a Metre tape used for?
It is a common measuring tool. Its design allows for a measure of great length to be easily carried in pocket or toolkit and permits one to measure around curves or corners. Today it is ubiquitous, even appearing in miniature form as a keychain fob, or novelty item. Surveyors use tape measures in lengths of over 100 m.
What does measuring tape used to measure?
A tape measure is a portable measurement device used to quantify the size of an object or the distance between objects. The tape is marked along the tape edge in inches and fractional inches, typically in quarter-, eight-, sixteenth-inch increments.
What is meters on a tape measure?
Find the meters. 1 meter is made of 100 centimeters. That means that every 100 centimeter lines, you should see the meter marked down. For example, you should see a label for 3 meters after 300 centimeter lines.
How do you use a meter tape measure?
To use a tape measure, pull the tang out from the housing and hook it on the edge of the object to be measured. Stretch the blade across the object, press the lock, and then observe where the blade meets the end of the object. The nearest line on the blade to the end of the object is the final measurement.
What is measuring tape used for in agriculture?
Measuring tape for farm survey, description and uses (iv) The tape is normally wound in a small case from where it is unwound for use. It is used for taking measurement of length, breadth and height.
How do you measure meters by hand?
One meter (39 inches) is a similar measurement to the yard above, but use your arm with fingers extended and measure to the tip of the fingers. This is an easy way to estimate yards and meters of cord, fabric, or ribbon.
What are the 4 instruments needed in taping?
When proper procedures are followed the error will be less than 1.0 ft in 3,000 ft. The standard equipment for a taping party, usually at least three people, consists of a tape, two range poles, a set of 11 chaining pins, two plumb bobs, a hand level, and a field notebook.
What is used to measure growth in plants?
An auxanometer (Gr. auxain= “to grow” + metron= “measure”) is an apparatus for measuring increase of growth in plants. Sensitive auxanometers allow measurement of growth as small as a micrometer, which allows measurement of growth in response to short-term changes in atmospheric composition.