Why does my Canon printer not take the paper?
Paper may be jammed if the rear cover is not closed completely. Push the rear cover until it is closed completely. If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact the service center.
Why is my printer not grabbing the paper?
The paper might not be engaged with the feed rollers. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.
How do I reset my Canon mp210 printer?
* Hold the Power Button, release the Resume Button. * Not releasing the Power Button, double click “Resume” and release Both Buttons. * Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
How do you fix a Canon printer that won’t feed paper?
Solution
- Make sure that the printer is on, and then remove any paper from the Rear Tray.
- Open the printer properties dialog box.
- Click the Maintenance tab and then Roller Cleaning.
- Confirm the displayed message and click OK.
- Make sure that the Paper Feed Roller stops rotating.
- Confirm the displayed message and click OK.
How do you clean the rollers on a Canon Pixma printer?
My Canon Account
- Prepare the printer.
- Open the printer driver setup window.
- Click Roller Cleaning on the Maintenance tab.
- Select Rear Tray, and click OK.
- Open the Rear Tray.
- Place a moistened cotton swab, etc. to one of the protrusions (A) of the feed roller shaft.
- Execute paper feed roller cleaning.
How do I get my Canon printer to stop feeding paper?
How do I fix my Canon ink absorber full?
Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.